Vermont Casting DBT36 - Manual (Page 6)

DBT33/DBT36/DBT39 -6- 10002789/0
F
INAL
F
INISHING
Non-combustible materials such as brick or tile may be
extended over the edges of the face of the appliance. DO NOT
cover any vent or grille panels.
If a Trim Kit is going to be installed on the replace, the brick
or tile will have to be installed ush with the edges of the
appliance.
G
AS
S
PECIFICATIONS
Max. Min.
Input Input
Model Fuel Gas Control BTU/h BTU/h
DBT33RN Nat. Millivolt 15,000 10,500
DBT33RP Prop. Millivolt 15,000 11,250
DBT36RN Nat. Millivolt 18,000 12,600
DBT36RP Prop. Millivolt 18,000 13,500
DBT39RN Nat. Millivolt 22,000 15,400
DBT39RP Prop. Millivolt 22,000 16,500
G
AS
I
NLET
& M
ANIFOLD
P
RESSURES
Fig. 3
Fig. 4
DBT33 / DBT36 / DBT39
CERTIFIED TO
ANSI Z21.88b-1999 / CSA Z2.33b-M99
Vented Gas Fireplace Heaters
Inlet Minimum
Inlet Maximum
Manifold Pressure
Natural Gas LP (Propane)
4.5" WC
7" WC
3.5" WC
11" WC
13" WC
10" WC