Dell 3100cn Color Laser Printer - Manual (Page 103)

according to the line/column specified.
txt2ps2 interprets the following control codes. Other control codes/undefined codes will be converted to octal numbers and output as-is.
LF
Line feed
FF
Form feed (modifiable by option)
TAB
8-column tab stop (modifiable by option)
BS
Backspace 1 character
Option
-d
Enables the short-edge binding feature. When it is specified, the printing direction or position will be adjusted and both sides of the paper printed so
that the shorter edge of the pages can be bound. This option is available only when optional duplex module is installed on the printer.
-D
Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted and both sides of the paper printed so that
the longer edge of the pages can be bound. This option is available only when optional duplex module is installed on the printer.
-I tray-input
Specifies the paper tray. A paper tray can be selected by directly specifying a tray or by specifying a paper size.
When a paper size is specified, the tray loaded with paper of the specified size will be found and selected automatically.
The parameters for selecting a paper tray are as follows.
1
Feed paper from tray 1 (standard 250-sheet tray module).
2
Feed paper from tray 2 (optional 250-sheet tray module or 500-sheet tray module).
A4
Feed paper from the tray loaded with A4 (210 x 297 mm).
A5
Feed paper from the tray loaded with A5 (148 x 210 mm).
B5
Feed paper from the tray loaded with B5 (182 x 257 mm).
LT
Feed paper from the tray loaded with Letter (8.5 x 11 inches).
FL
Feed paper from the tray loaded with Folio (8.5 x 13 inches).