Setup printing letter plain 1 from tray 2 – Dell 3100cn Color Laser Printer User Manual
Page 73
11.
Now press MENU to get back to Tray Settings/Paper Size.
12.
Press
to get to Paper Type.
13.
Press
to select Paper Type.
14.
Press
to get to Tray 1.
15.
Press
to select Tray 1.
16.
Using
and
, select the appropriate paper type (Plain 1).
17.
Press SELECT, once Plain 1 is displayed on the lower line.
18.
Now we have the Tray 1 Type set to Plain 1.
19.
Now press MENU to get back to Ready to Print.
20.
Now insert the Letter-sized stack of paper into the Tray 1.
21.
On the screen Tray 1/Letter will appear. (ONLY ON 3x00cn)
22.
Press SELECT to confirm this. (ONLY ON 3x00cn)
23.
Now on the screen Tray 1/Plain 1 will appear.
24.
Press SELECT to confirm this.
25.
We now have all the hardware settings on the printer correct.
Now, all software settings screen shots are from WORD, this was done in Word. However if in any application, you go File ® Print and then click the
Properties button, you will get this same driver properties window.
26.
Open up Word and create a new document.
27.
Go to File ® Print.
28.
Select the Dell Color Laser Printer from the printers list.
29.
Click the Properties button to the right.
30.
This brings up Driver Properties.
31.
Click on the Paper Tray Tab.
32.
Change the Paper Source to Tray 1.
33.
Click the Paper Tab.
34.
Select in paper size, Letter.
35.
Select for Output Size, Same as Paper Size.
36.
Click OK.
37.
Click Close.
38.
Now the printer driver is setup correctly.
39.
Now go to File ® Page Setup.
40.
Click the Paper Tab.
41.
Change Paper Size to Legal.
42.
Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
43.
Click OK.
44.
Type in some gibberish in the body of the document and click Print!
Setup printing Letter Plain 1 from Tray 2
1.
On the printer operator panel press MENU.
2.
Press
to get to Tray Settings.
3.
Press
to select Tray Settings.
4.
Press
to get to Paper Size. (ONLY ON 3x00cn)
5.
Press
to select Paper Size. (ONLY ON 3x00cn)
6.
Press
to get to Tray 2. (ONLY ON 3x00cn)
7.
Press
to select Tray 2. (ONLY ON 3x00cn)
8.
Using
and
, select the appropriate paper size (Letter). (ONLY ON 3x00cn)
9.
Press the middle button, SELECT, once Letter is displayed on the lower line, this puts a * by it. (ONLY ON 3x00cn)
10.
Now we have the Tray 2 Size set to Letter. (ONLY ON 3x00cn)