Installing the ux filter, Before using ux filter, Before installation – Dell 3100cn Color Laser Printer User Manual
Page 90
Before Using UX Filter
Check the following items before using the UX filter.
Before setting up the workstation, set up the printer as follows.
1.
Make sure the lpd port is working or not when using the network environment. If the lpd port is not working, set LPD to On on the operator panel.
(Mandatory) See "
Protocol
" for more information.
When a parallel or USB port is to be used, make sure these are working. (Mandatory)
2.
Set up IP address and subnet mask when the printer is used in the network environment. (Mandatory)
3.
Make TBCPFilter function available if TBCPFilter function is installed on the printer. See "
Adobe Protocol
" for more information.
Installing the UX Filter
Before Installation
The following are required for the installation.
l
Supported operating system is described in "
Page-description Language (PDL)/Emulation, Operating System, and Interface
."
Disk capacity: 20 MB of free disk space required, including temporary working space for installation.
l
Log on as a root account to perform the operation here. If you have no root privilege, contact your system administrator.
l
Output printer must be registered in the workstation before using UX filter. (HP-UX)
Use sam command for registration of output printer.
For more information, see the HP-UX related manual.
Files Added by the Installation
The following files will be added when the UX filter is installed.
Solaris
Directory
File name
Contents
/usr/local/dellbin3100cn
txt2ps2
Text conversion utility
sunras2ps2
SunRaster conversion utility
tiff2ps2
TIFF conversion utility
xwd2ps2
XWD conversion utility
dellpsif
Input filter
/usr/lib/lp/postscript
dellposttxt
Symbolic link file to txt2ps2
dellpostps
Symbolic link file to dellpsif
dellbinpath3100cn
Directory description file for the UX filter print tool
/usr/lib/lp/model
Model interface program Source file of the model interface program (stored as the printer name during registration)
/etc/lp/interfaces
Model interface program Interface program for PRINTER (stored as the printer name during registration)
/etc/lp/fd
dellposttxt.fd
Filter description file for txt2ps2