Dell 3100cn Color Laser Printer - Manual (Page 181)

*1 The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.), comma (,), yen mark (￥), back slash (\), double
quotation ("), comparison symbols (< >), brackets ([ ]), operation symbols (+, =, or ~), pipe (|), slash (/), and space ( ).
SMB
Purpose:
To configure detailed settings for SMB.
Values:
Network Address Displays the IPX network address.
NetWare Device Name* 1 Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object Name). For RPrinter Mode, set the Remote Printer
Name (Printer Name in Bindery and Printer Object Name in Directory). The original setting remains valid if no input
is made.
Active
Mode Bindery:
PServer Mode Selects this option when using Directory: PServer Mode in Bindery: PServer Mode.
Bindery:
RPrinter Mode Selects this option when using Directory: RPrinter Mode in Bindery: PServer Mode.
Directory:
PServer Mode Selects this option when using Directory: PServer Mode in Bindery: RPrinter Mode.
Directory:
RPrinter Mode Selects this option when using Directory: RPrinter Mode in Bindery: RPrinter Mode.
Tree Name* 1 Specifies the tree name up to 32 alphanumeric characters. Configure this item only when Directory: PServer
Mode or Directory: RPrinter Mode is selected.
Context Name Specifies the context name of the Print Server Object up to 255 alphanumeric characters. Configure this item only
when Directory: PServer Mode or Directory: RPrinter Mode is selected.
File Server Name* 1 Specifies the file server name up to 47 alphanumeric characters. Configure this item only when Bindery: PServer
Mode or Bindery: RPrinter Mode is selected.
Print Server Name* 1 Specifies the print server name up to 47 alphanumeric characters. Configure this item only when Bindery: RPrinter
Mode or Directory: RPrinter Mode is selected.
Polling Interval Sets the time interval from when print data enters the print queue until printing starts. The setting range is from 1
to 1000 seconds. The original setting remains valid if no input is made. Configure this item only when Bindery:
PServer Mode or Directory: PServer Mode is selected.
Receive Time-Out Sets the timeout period that confirms data has been received. The setting range is from 1 to 1000 seconds.
NCP
Packet
Burst On Uses NCP packet burst.
Off Does not use NCP packet burst.
Password Sets the print server password up to 32 alphanumeric characters. Configure this item only when Bindery: PServer
Mode or Directory: PServer Mode is selected.
Confirm Password Allows you to confirm the configured password by re-entering the same password.
Status Information Displays the messages according to the conditions of the printer.
Logical Printer Number Displays the printer number during Bindery: RPrinter Mode or Directory: RPrinter Mode.
NOTE: The settings in the NetWare page will be valid only when NetWare or the printer is rebooted. Click the Restart printer to apply new settings.
button to apply new settings.
NOTE: An optional multi protocol card is required to display the NetWare page.
Host Name Specifies the host name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Workgroup Specifies the workgroup name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Administrator Name Specifies the administrator name up to 20 alphanumeric characters. The original setting will remain valid if no input is made.
The default name is admin.
Administrator Password Specifies the administrator password up to 14 alphanumeric characters. The original setting will remain valid if no input is
made. The default password is password.
Confirm Administrator
Password Allows you to confirm the configured administrator password by re-entering the same password.
Maximum Sessions Displays the maximum sessions.
Unicode Support On Notifies the host name and workgroup name in Unicode characters.
Off Does not notify the host name and workgroup name in Unicode characters.