Dell 3100cn Color Laser Printer - Manual (Page 133)

-Pr=mode
Specifies Print Mode.
-Cc=mode
Specifies RGB Color Correction.
This option is available only for color printing.
-Gc=mode
Specifies RGB Gamma Correction.
-Sc=mode
Specifies Screen.
-Gg=mode
Specifies Gray Guaranteed.
This option is available only for color printing.
-Ct
Specifies Color Transformation.
This option is available only for color printing.
File
/usr/local/dellbin3100cn/.dellpsdefault3100cn
This is the default command option setting.
Important
l The dellpsif filter ignores the pw and pl entries of /etc/printcap. Thus, the pw and pl entries cannot be used to change the option of each paper size.
l If the same option is specified for PostScript files which already have added options, such as paper selection, it will be ignored.
l Use the -ps option only when a PostScript file that contains no %! at the beginning of the file is processed as the PostScript file. If a normal text file is
input, it will not function correctly.
Precautions and Limitations
During Installation
Pay attention to the following points during the installation.
Solaris
l Use lpadmin command to register the default printer.
# lpadmin -d Printer Name
l To inhibit the banner sheets output, change the value of nobanner=no to nobanner=yes that includes in the file corresponding to the printer name
in /etc/lp/interfaces/.
l The printer registered by UX filter must not be changed by admintool.
l When Content types: postscript is displayed by typing lpstat -p printername -l, it's necessary to delete the printer and reinstall.