Removing print jams near the center output tray – Dell 3100cn Color Laser Printer User Manual
Page 211
4.
Press the levers on both sides and remove any jammed print media.
5.
Return the levers to their original positions.
6.
Close the paper cover.
7.
Close the BTR cover.
8.
Close the rear cover.
Removing Print Jams Near the Center Output Tray
1.
Open the paper cover or the optional duplex module (if the duplex module is installed).
2.
Lift up the levers on both sides.
NOTE:
Never touch the outer levers located on both sides of the fuser unit, which are used to remove or install the fuser unit.
NOTE:
To resolve the message displayed on the operator panel, you must clear all print media from the print media path.
CAUTION:
The inside of the printer is hot.
NOTE:
Never touch the outer levers located on both sides of the fuser unit, which are used to remove or install the fuser unit.