Dell PowerVault DL2000 - Manual (Page 12)

Figure 4. Connecting the SAS Cable From the PowerVault DL2 xxx System to the PowerVault MD1200 Storage Enclosure
1. PERC adapter
2. primary EMM
NOTE: If more than one storage enclosure is used, connect the SAS Out port on the primary EMM to the SAS In
port on the next down-chain enclosure. See the
Dell PowerVault DL Backup to Disk Appliance Interoperability
Guide at support.dell.com/manuals to determine the maximum number of storage enclosures supported by the
PERC adapter.
2. Connect the PowerVault DL2xxx system to the storage enclosure and optional tape library
12