Enclosure numbers – Dell PowerVault DL2000 User Manual

Page 25

Advertising
background image

NOTE: The Compatibility Manager feature is available on versions 3.2 and later of the appliance software stack.
See the

Dell PowerVault DL Backup to Disk Appliance Interoperability Guide

at support.dell.com/manuals for

supported DL2

xxx

platforms.

Enclosure Numbers

The backup application and Server Administrator refer to the MD

xxxx

storage enclosures by enclosure numbers.

Windows storage management applications refer to the enclosure by the bus number. The enclosure number and bus
number refer to the same enclosure.

PERC 6/E

The first enclosure attached to port 0 of the PERC 6/E adapter is 0. Additional enclosures daisy-

chained off the first enclosure are numbered 1 and 2 respectively.

The first enclosure attached to port 1 of the PERC 6/E adapter is 3. Additional enclosures attached to

this enclosure are numbered 4 and 5 respectively.

PERC

H800

The first enclosure attached to port 0 of the PERC H800 adapter is 0. Additional enclosures daisy-

chained off the first enclosure are numbered 1, 2, and 3 respectively.

The first enclosure attached to port 1 of the PERC H800 adapter is 4. Additional enclosures attached

to this enclosure are numbered 5, 6, and 7 respectively.

Internal PERC adapters such as the PERC 6/i and H700 are assigned the enclosure number 255.

25

Advertising
This manual is related to the following products: