Dell PowerVault NX3200 - Manual (Page 125)

Error Code Message Information
Action Remove and re-seat the failed disk. If the issue persists, see Getting Help .
PDR1016
Message Drive < number > is removed from disk drive bay < bay >.
LCD Message Drive < number > removed from disk drive bay < bay >. Check drive.
Details The controller detected that the drive was removed.
Action Verify drive installation. Re-seat the failed drive. If the issue persists, see Getting Help .
PST0128
Message No memory is detected.
LCD Message No memory is detected. Inspect memory devices.
Details System BIOS was unable to detect memory in the system.
Action Re-seat the memory modules. If the issue persists, see Getting Help .
PST0129
Message Memory is detected, but is not configurable.
LCD Message Memory is detected, but is not configurable. Check memory devices.
Details System BIOS detected memory, but was unable to configure the memory for system
operation.
Action Compare system memory installation to supported system memory configurations.
PSU0001
Message Power supply < number > failed.
LCD Message PSU < number > failed. Check PSU.
Action Remove and reinstall the power supply. If the issue persists, see Getting Help .
PSU0002
Message A predictive failure detected on power supply < number >.
LCD Message Predictive failure on PSU < number >. Check PSU.
Details System performance and power redundancy may be degraded or lost.
Action Remove and reinstall the power supply at the next service window. If the issue persists,
see
Getting Help .
PSU0003
Message The power input for power supply < number > is lost.
LCD Message Power input for PSU < number > is lost. Check PSU cables.
Details The power supply is installed correctly but an input source is not connected or is not
functional.
Action Verify the input source is attached to the power supply. Verify the input power is within
the operating requirements for the power supply.
PSU0006
Message Power supply < number > type mismatch.
125