Dell PowerVault NX3200 - Manual (Page 45)

Pull the hard-drive blank out until it is free of the hard-drive slot.
Figure 13. Removing and Installing a 2.5 Inch Hard-Drive Blank (Back)
1. hard-drive blank (back)
Installing A 2.5 Inch Hard-Drive Blank (Back)
Insert the hard-drive blank into the hard-drive slot until it clicks into place.
Removing A 3.5 Inch Hard-Drive Blank
CAUTION: To maintain proper system cooling, all empty hard-drive slots must have drive blanks installed.
1. If installed, remove the front bezel.
2. Grasp the front of the hard-drive blank, press the release button and slide the blank out until it is free of the hard-
drive slot.
Figure 14. Removing and Installing a 3.5 Inch Hard-Drive Blank
1. hard-drive blank
2. release button
45