Installing a cooling fan – Dell PowerVault NX3200 User Manual
Page 48
NOTE: The procedure for removing each fan is identical.
1.
Open the system.
2.
Press the fan release tab and lift the cooling fan out of the cooling-fan assembly.
Figure 16. Removing and Installing a Cooling Fan
1. cooling-fan assembly
2. fan release tab
3. cooling fans (6)
4. cooling-fan connectors (6)
Installing A Cooling Fan
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Open the system.
2.
Align the plug at the base of the cooling fan with the connector on the system board.
3.
Slide the cooling fan into the securing slots until the tabs lock into place.
4.
Close the system.
48