Dell PowerVault NX3200 - Manual (Page 21)

Menu Item Description
Virtualization Technology Allows you to enable or disable the additional hardware capabilities provided for
virtualization. By default, the Virtualization Technology option is set to Enabled.
Adjacent Cache Line
Prefetch Allows you to optimize the system for applications that require high utilization of sequential
memory access. By default, the Adjacent Cache Line Prefetch option is set to Enabled. You
can disable this option for applications that require high utilization of random memory
access.
Hardware Prefetcher Allows you to enable or disable hardware prefetcher. By default, the Hardware Prefetcher
option is set to Enabled.
DCU Streamer Prefetcher Allows you to enable or disable Data Cache Unit streamer prefetcher. By default, the DCU
Streamer Prefetcher option is set to Enabled.
DCU IP Prefetcher Allows you to enable or disable Data Cache Unit IP prefetcher. By default, the DCU IP
Prefetcher option is set to Enabled.
Execute Disable Allows you enable or disable execute disable memory protection technology. By default,
the Execute Disable option is set to Enabled.
Number of Cores per
Processor Allows you to control the number of enabled cores in each processor. By default, the
Number of Cores per Processor option is set to All.
Processor 64-bit Support Specifies if the processor(s) support 64-bit extensions.
Processor Core Speed Displays the maximum core frequency of the processor.
Processor Bus Speed Displays the bus speed of the processors.
NOTE: The processor bus speed option displays only when both the processors are
installed.
Processor 1
NOTE: The following settings are displayed for each processor installed in the system.
Family-Model-Stepping Displays the family, model and stepping of the processor as defined by Intel.
Brand Displays the brand name reported by the processor.
Level 2 Cache Displays the total L2 cache.
Level 3 Cache Displays the total L3 cache.
Number of Cores Displays the number of cores per processor.
SATA Settings Screen
Menu Item Description
Embedded SATA Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID mode. By default, Embedded SATA
is set to AHCI Mode.
Port A Auto enables BIOS support for the device attached to SATA port A. By default, Port A is set to Auto.
Port B Auto enables BIOS support for the device attached to SATA port B. By default, Port B is set to Auto.
Port C Auto enables BIOS support for the device attached to SATA port C. By default, Port C is set to Auto.
21