Dell XPS 710 H2C - Manual (Page 44)

Removing and Installing Parts: Dell XPS 710 H2C Edition Service Manual
file:///C|/Preeji_working%20folder/Projects/E-Doc/Dimension%20and%20XPS/xps-710-h2c/SM/parts.htm[3/13/2013 11:45:23 AM]
2. Remove the computer cover (see Removing the Computer Cover ).
3. Align the drive panel tabs with the side-door hinges.
1 drive release latch 2 drive panel 3 drive panel tabs
4. Rotate the drive panel toward the computer until it snaps into place on the drive panel.
5. Replace the computer cover (see Replacing the Computer Cover ).
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Removing a Floppy Drive
1. Follow the procedures in Before You Begin ."
2. Remove the computer cover (see Removing the Computer Cover ).
3. Remove the drive panel (see Removing the Drive Panel ).
4. Disconnect the power and data cables from the back of the floppy drive.