Dell XPS 710 H2C - Manual (Page 49)

Removing and Installing Parts: Dell XPS 710 H2C Edition Service Manual
file:///C|/Preeji_working%20folder/Projects/E-Doc/Dimension%20and%20XPS/xps-710-h2c/SM/parts.htm[3/13/2013 11:45:23 AM]
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
8. Connect the computer and devices to electrical outlets, and turn them on.
Installing a Media Card Reader
1. Follow the procedures in Before You Begin .
2. Remove the computer cover (see Removing the Computer Cover ).
3. Remove the drive panel (see Removing the Drive Panel ).
4. Remove the existing media card reader, if applicable (see Removing a Media Card Reader ).
5. If no screws are attached to the Media Car d Reader, check the inside of the drive panel for shoulder screws. If screws
are present, attach the screws to the new card reader.
1 media card reader 2 shoulder screws (4)
6. Slide the Media Card Reader into the drive bay until it clicks into place.