Removing the computer cover – Dell XPS 710 H2C User Manual
Page 9
Removing the Computer Cover: Dell XPS 710 H2C Edition Service Manual
file:///C|/Preeji_working%20folder/Projects/E-Doc/Dimension%20and%20XPS/xps-710-h2c/SM/cvrop1.htm[3/13/2013 11:45:20 AM]
Removing the Computer Cover
Dell™ XPS™ 710 H2C Edition Service Manual
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
NOTICE:
To avoid electrostatic discharge and damage to internal components, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface on the computer chassis.
2. Pull back on the cover release latch.
NOTICE:
Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk top space.
1
computer cover
2
cover release latch
3
cover hinge tabs
4
stabilizing feet (closed)
3. With the cover release latch pulled back, grip the sides of the cover, then pivot the top of the cover up and away from
the computer.
4. Slide the cover forward and up to remove it from the hinge slots, then set it aside in a secure and protected location.