Dell XPS 710 H2C - Manual (Page 56)

Removing and Installing Parts: Dell XPS 710 H2C Edition Service Manual
file:///C|/Preeji_working%20folder/Projects/E-Doc/Dimension%20and%20XPS/xps-710-h2c/SM/parts.htm[3/13/2013 11:45:23 AM]
1 power cable 2 TEC_PUMP
8. Disconnect the fan cable from the FAN1_CPU connector on the system board (see System Board Components ).
NOTICE: The processor heat sink is attached to the liquid cooling assembly. When you remove the liquid cooling
assembly, lay it upside down or on its side to avoid damaging the heatsink thermal interface.
NOTICE: The screw at the front of the liquid cooling assembly is not captive. Remove the screw and set it aside in a
secure location.
9. Loosen the seven screws on the liquid cooling assembly, then lift the assembly out of the computer and set it aside.