Dell XPS 710 H2C User Manual
Page 55
Removing and Installing Parts: Dell XPS 710 H2C Edition Service Manual
file:///C|/Preeji_working%20folder/Projects/E-Doc/Dimension%20and%20XPS/xps-710-h2c/SM/parts.htm[3/13/2013 11:45:23 AM]
CAUTION:
The processor heat sink can get very hot during normal operation. Be sure that the heat sink has
had sufficient time to cool before you touch it.
3. Remove the drive panel (see
4. Slide the drive release latch towards the base of the computer to release the shoulder screw(s) on the CD/DVD
drive(s), then slide the CD/DVD drive(s) forward, out of the way.
NOTE:
It is not necessary to disconnect the CD/DVD drive cables unless you intend to fully remove the CD/DVD
drive(s) from the computer. For information on how to remove a CD/DVD drive see
1
drive release latch
2
CD/DVD drive
5. Remove any full-length expansion cards (see
Removing PCI and PCI Express Cards
).
6. Disconnect the liquid cooling assembly power cable.
7. Disconnect the liquid cooling assembly cable from the TEC_PUMP connector on the system board (see