Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 14)

See " Logging in to the NAS Manager ."
2. Click Maintenance.
3. Click Language.
4. Click the radio button next to the language you want to use.
5. Click OK.
6. Reboot the system when prompted.
The NAS system reboots, and the he changes are complete after the reboot.
How to Find Online Help
The NAS Manager provides two kinds of help. The NAS Manager online help documents the NAS Manager content. The
Windows 2000 help, which you can access through the Terminal Services on the Maintenance page, documents Windows
2000 content.
To access Help in the NAS Manager, select one of the following methods:
When you click Help on the primary menu, the NAS Manager screen is replaced by a split Help screen that has the
Table of Contents of help topics on the left and the topic content on the right.
Click the question mark icon at the far right of the primary menu to access the context-sensitive help topic related
to the current page.
In addition to the online help for your system, you can also access help for Microsoft Windows 2000 through Terminal
Services.
To start Windows 2000 help, perform the following steps:
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager ."
2. Click Maintenance.
3. Click Terminal Services.
4. Log in to the NAS system.
NOTE: The default administrative user name is administrator and the default password is powervault.
5. Perform one of the following procedures:
From the Start menu, click Help.
On the Advanced Administration Menu, click Administrative Tools, and then click Windows Powered
Help.
Configuring Network Properties
Use the Network tab in the NAS Manager to configure the NAS system for the network. This section provides information
for setting up your NAS system on the network, including naming the system, defining the IP address, and configuring the
NIC.
Naming the NAS System