Dell PowerVault 715N (Rackmount NAS Appliance) User Manual
Page 49
6. Change the IP address on the network adapter of the client system to 10.40.10.1 and the Net mask to
255.255.255.0:
a. From the desktop of the client system, right-click My Network Places and select Properties.
b. In the Network and Dial-up Connections window, right-click the network interface controller that you
connected to the NAS system with the crossover cable in step 1.
c. In the Local Area Connection Properties window, click Internet Protocol (TCP/IP), and then click
Properties.
d. Click Use the following IP address.
e. For IP address, type 10.40.10.1.
f. For Subnet mask, type 255.255.255.0.
g. Click OK, and then click OK to close the Local Area Connection Properties window.
h. If you are prompted to reboot the client system, click No.
7. Create a share for the CD drive:
a. Log in to the client system with an account that has administrator privileges.
b. Double-click My Computer
c. Right-click the CD drive, and select Sharing.
d. Click Share this folder.
e. Type CD for the name of the share, and then click OK to confirm the share settings.
8. Install the Dell Reinstallation Console from the Resource CD:
a. Insert the Resource CD into the CD drive of your client system.
The Dell PowerVault 715N Resource CD window displays in a browser window.
NOTE:
If the CD does not run automatically, double-click the start.bat file on the CD.
b. Click Resources.
c. Click Install Reinstallation Console.
d. When the File Download window displays, click Open this file from its current location, and then click
OK.
e. Click Next and follow the instructions on the screen.
f. When prompted to reboot the client system, click Yes.
The Resource CD is no longer required; remove it from the client system.
9. Insert the Reinstallation CD in the client system's CD drive.
10. Enable the Dell OpenManage™ Kick-Start utility and create your DHCP settings:
a. Turn on the NAS system.
The system must be turned on so that you can set the IP address with Kick-Start.
b. Click the Start button and point to Programs® Dell Reinstallation Console® Dell OpenManage
KickStart.
c. When asked if you want to run the program, click Yes.
d. At the bottom of the Dell OpenManage Kick-Start window, click Setup.
e. Click Add.