Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 52)

c. Right-click Users and select New User.
d. In the New User window, type pv715 as the user name.
e. Type password for the Password, and type it again in Confirm password.
f. Click User must change password at next logon to clear the check box.
g. Click Create and then click Close.
7. Create a share for the CD drive on the client system:
a. Double-click My Computer.
b. Right-click the CD drive, and select Sharing.
c. Type CD for the name of the share, and then click OK to confirm the share settings.
8. Install the Dell Reinstallation Console from the Resource CD:
a. Insert the Resource CD into the CD drive of your client system.
The Dell PowerVault 715N Resource CD screen displays in a browser window.
NOTE: If the CD does not run automatically, double-click the start.bat file on the CD.
b. Click Resources.
c. Click Install Reinstallation Console.
d. When the File Download window displays, click Open this file from its current location, and then click
OK.
e. Click Next and follow the instructions on the screen.
f. When prompted to reboot the client system, click Yes.
9. Create a reinstallation diskette from the Resource CD:
a. Make sure that the Resource CD is in the CD drive of your client system.
b. In the Resource CD Main Menu window, click Resources.
c. In the Resources window, click Reinstallation Diskette.
d. When the File Download window displays, click Run this program from its current location, and then
click OK.
e. Click Yes if you receive a security warning.
A DOS screen appears and prompts you to insert a diskette into the diskette drive of the client system.
f. Insert a formatted diskette into the diskette drive of your client system, and then press <Enter>.
The DOS screen closes after the reinstallation diskette is made.
10. Edit the go.bat file for the renamed client system and CD drive:
a. In Windows Explorer, right-click the go.bat file on the diskette, and then select Edit to edit the file to the
following variable value for your environment:
\\server_name\share_name, where server_name is the name of the client system and share_name is the
name of the CD drive share (for example, \\PV715\CD)
b. Save and exit the go.bat file.
11. Update the boot image: