Dell PowerVault 715N (Rackmount NAS Appliance) User Manual
Page 39
6. On the Advanced Administration Menu under System Management, click Computer Management.
NOTE:
If the Advanced Administration Menu does not display, double-click the Advanced Administration
Menu icon on the desktop of the NAS system.
7. Click Computer Management in the left pane.
8. Click System Tools in the left pane.
9. Click Device Manager in the left pane.
10. Click Unknown Devices in the right pane.
NOTE:
The tape device may also appear under Other Devices.
11. Double-click the tape device.
12. Click Driver in the pop-up window.
13. Click Update Driver.
The Upgrade Device Driver Wizard displays.
14. Click Next.
15. Click the radio button next to Search for a suitable driver for my device (recommended), and then click
Next.
16. In Optional search locations, click the check box next to Specify a location, and deselect the other check
boxes.
17. Click Next.
18. In the path for Copy manufacturer's files from, specify the folder name that contains the device drivers.
19. Click OK, and then click Next.
The Upgrade Device Driver Wizard searches the specified folder for the driver files.
20. Make sure that the wizard has selected the appropriate PowerVault tape device, and then click Next.
21. Click Finish.
22. Click Close to exit the driver properties dialog box.
Installing Drivers for PowerVault Tape Drive Media Changers
To install drivers for tape media changers when using Windows 2000 backup and recovery tools, perform the following
steps:
1. Connect the PowerVault tape device, and then restart the NAS system.
2. Log in to the NAS Manager.
See "
" in "NAS Manager."
3. Click Maintenance.
4. Click Terminal Services.
5. Log in to a Terminal Services Client session.
6. In the Advanced Administration Menu, click Computer Management under System Management.