Restoring initial system setup – Dell PowerVault 715N (Rackmount NAS Appliance) User Manual
Page 60
17. Click Finish.
18. When the Enter Backup File Name window displays, click OK.
NOTE:
If your backup file is in a different location, click Browse and navigate to the file.
19. Click Start Restore.
20. When a message warns that the system restore will overwrite the current system state, click OK.
21. Click OK in the Confirm Restore window.
22. Restart the NAS system after the restore process completes.
NOTE:
Windows must replace all locked files on the system; therefore, the process of restarting the system might
take approximately 15 minutes to complete.
Restoring Initial System Setup
After the operating system is reinstalled on the system, the NAS system is set back to factory defaults. Make sure you
configure the system again to establish network communication. For information about configuring your system, see
"