Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 76)

NOTE: The default administrator user name is administrator and the default password is powervault.
4. Close the Advanced Administration Menu by clicking Exit.
5. Double-click My Appliance on the NAS desktop.
6. If this is a new system from Dell, perform the following steps, and then go to step 8. If you are performing this
procedure after reinstalling your operating system, go to step 7.
a. Double-click Control Panel.
b. Double-click Regional Options.
7. If you performed the reinstallation procedure on your system, perform the following steps:
a. In Windows Explorer on a remote system, right-click the CD drive, and then click Sharing. In Sharing tab
on the Compact Disk Properties page, click the radio button next to Share this folder to share the CD
drive, and then insert the Multilingual Support CD that came with the PowerVault 715N into your remote
system CD drive.
b. Map a network drive to the CD share, but do not select Reconnect at logon.
c. Browse to the mapped drive, and then double-click the Multilingual Support CD icon to launch the
Multilingual Support CD's Web interface.
d. Click the Install Language Locales Not Supported by MUI link to launch the Regional Options control
panel.
8. From the Language Settings for the System panel, select the languages to be configured.
9. Set the default language for the system by clicking Select default... and selecting the appropriate language from
the menu, and then click OK.
10. Click Apply to complete the operation.
11. If the Insert Disk window appears, you must perform the following steps:
a. Click OK.
b. In the Files needed window, click Browse, browse to the i386 directory on the Multilingual Support CD or
in the C:\localization directory (which does not exist if you reinstall the operating system), and then click
Open.
c. Click Open, and then click OK from the Insert Disk window to allow the operating system to find the
required files for installation.
12. After the installation is complete, if applicable, disconnect the mapped network drive from the CD share that you
mapped in step 7.
13. Reboot your system.
NOTE: For more information, see the Microsoft Windows Powered operating system's online help.
Network Adapter Teaming
Network adapter teaming allows the system to use the combined throughput of multiple network ports in parallel to
increase performance or to provide fault tolerance. Network adapter teaming on your NAS system supports the following
technologies:
Adaptive Load Balancing (ALB) from Intel®
Adapter Fault Tolerance (AFT) from Intel
Link Aggregation
Fast EtherChannel (FEC)
IEEE 802.3ad