Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 18)

Modifying Share Properties
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager ."
2. Click Shares.
3. On the Shares page, click Shares.
4. In the Shared Folders table, click the share whose properties you are modifying.
5. Click Properties.
The Share Properties page displays. Use this page to change the description of the share. You can also select the
type of client from which the share is accessible.
6. Click OK.
Removing a Share
Although a single user interface is provided for creating a share for all protocols, a separate share is actually for each
protocol. You can remove a share for one protocol without removing the share for the other protocols; however, this
process can be quite confusing. Therefore, it must be done carefully.
When you remove a share, access to the share is removed; however, the actual files remain on the NAS system.
To remove a share, perform the following steps:
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager ."
2. Click Shares.
3. On the Shares page, click Shares.
4. In the Shared Folders table, click the share that you want to delete.
5. Click Delete.
A confirmation dialog appears.
6. Click OK to confirm the deletion, or click Cancel to keep the share.
Removing a Protocol From the Share
To remove one or more specific protocols from a share, perform the following steps:
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager ."
2. Click Shares.
3. On the Shares page, click Shares.
4. In the Shared Folders table, click the share for which you want to remove a protocol.
5. Click Properties.
6. Uncheck the protocol(s) to remove it from the share.
7. Click OK to confirm the protocol removal, or click Cancel to keep the protocol(s) for the share.