Services for novell® netware, Restarting workstation services, Enabling services for netware – Dell PowerVault 715N (Rackmount NAS Appliance) User Manual
Page 87: Configuring the nwlink ipx/spx compatible protocol, Internal network number
Restarting Workstation Services
If File Services for Macintosh cannot establish communications to the local RPC service, you may need to restart the
Workstation Service.
To restart the Workstation Service, perform the following steps:
1. Log in to the NAS Manager.
See "
2. Click Maintenance, and then click Terminal Services.
3. Log in to the NAS system as an administrator.
NOTE:
The default administrative user name is administrator and the default password is powervault.
The Advanced Administration Menu displays. If it does not display, double-click the Advanced Administration
Menu icon on the desktop of the NAS appliance.
4. Click System Management, and then click Computer Management.
5. Click Services and Application.
6. Double-click Services.
7. Right-click Workstation in the Services window, and select Restart.
8. Confirm that you want to restart the Workstation Services.
Services for Novell® NetWare®
Services for NetWare (SFN) are compatible with Novell NetWare Bindery service for authentication and file access using
the internetwork packet exchange/sequenced packet exchange (IPX/SPX) network protocol. Services for NetWare are
disabled by default. See "
Enabling Services For NetWare
The NetWare protocol is disabled on the NAS system by default. You must enable the NetWare protocol for NetWare
clients to access the NAS system.
To enable the NetWare protocol, perform the following steps:
1. Log in to the NAS Manager.
See "
" in "NAS Manager."
2. Click Shares.
3. Click Sharing Protocols.
4. Click NetWare Protocol, and then click Enable.
Configuring the NWLink IPX/SPX Compatible Protocol
To configure this protocol, you need the internal network number, the frame type, and the network number.
Internal Network Number
Internal network numbers are used for internal routing and are generally needed only for servers. You should not need to
change this option on your system.