Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 67)

%% = Percent sign
7. Click OK to save the new scheduled persistent image.
Deleting a Persistent Image Schedule
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager " in "NAS Manager."
2. Click Disks.
3. Click ActiveArchive.
4. Click Schedules.
5. On the Persistent Image Schedules page, click the check box next to the scheduled persistent image to be
deleted.
6. In the Tasks list on the Persistent Image Schedules page, click Delete.
7. Click OK to delete the item or Cancel to leave the item intact.
Editing the Properties of a Persistent Image Schedule
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager " in "NAS Manager."
2. Click Disks.
3. Click ActiveArchive.
4. Click Schedules.
5. In the Tasks list on the Persistent Image Schedules page, click Properties.
6. Use the appropriate menus to select the starting time, the frequency at which to repeat the persistent image
(Repeat every frequency), the day to begin, the volume(s), the image attributes (Read-only or Read/Write),
and the number of images to save (per schedule).
NOTE: To select multiple volumes, press and hold <Ctrl> and select all volumes that are to be included in
the persistent image.
NOTE: If volumes are not protected by RAID 1 or 5 or if volumes are frequently being added and removed,
Dell recommends that you make persistent images of individual volumes. Because multivolume persistent
images are linked to each other, a multivolume persistent image may become inaccessible if one volume in
the multivolume persistent image fails or is removed from the system.
7. Click OK to modify the schedule or Cancel to leave the schedule intact.
Accessing Stored Persistent Images
NOTE: Only Windows clients (CIFS) can access Dell ActiveArchive persistent images.
NOTE: The name of the utility that creates persistent images is Dell ActiveArchive. The name of the directory
where Dell ActiveArchive persistent images are stored is ActiveArchive.
1. Log in to the NAS Manager.