Dell PowerVault MD3220i User Manual
Deployment guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- Hardware Installation
- Installing PowerVault MD Storage Software
- Post Installation Tasks
- Guidelines for Configuring Your Network for iSCSI
- Uninstalling PowerVault MD Storage Software
- Appendix-Manual Configuration of iSCSI
- Step 1: Discover the Storage Array (Out-of-band Management Only)
- Step 2: Configure the iSCSI Ports on the Storage Array
- Step 3: Perform Target Discovery From the iSCSI Initiator
- Step 4: Configure Host Access
- Understanding CHAP Authentication
- Step 5: Configure CHAP Authentication on the Storage Array (Optional)
- Step 6: Configure CHAP Authentication on the Host Server (Optional)
- Step 7: Connect to the Target Storage Array From the Host Server
- Step 8: (Optional) Set Up In-Band Management
- Appendix-Using Internet Storage Naming Service
- Appendix-Load Balancing
- Appendix-Stopping and Starting iSCSI Services in Linux