Dell PowerVault MD3220i - Manual (Page 23)

Hardware Installation 23
Cabling PowerVault MD1200 Series Expansion
Enclosures
You can expand the capacity of your PowerVault MD3200i series storage array
by adding PowerVault MD1200 series expansion enclosures. You can expand
the physical disk pool to a maximum of 120 (or 192, if enabled using
Premium Feature activation) physical disks using a maximum of seven
expansion enclosures.
Expanding With Previously Configured PowerVault MD1200 Series
Expansion Enclosures
Use this procedure if your expansion enclosure is directly attached to and
configured on a Dell PowerEdge RAID Controller (PERC)H800 adapter. Data
from virtual disks created on a PERC H800 adapter cannot be directly
migrated to a PowerVault MD3200i series storage array or to a PowerVault
MD1200 series expansion enclosure connected to a PowerVault MD3200i
series storage array.
CAUTION: If a PowerVault MD1200 series expansion enclosure that was
previously attached to PERC H800 adapter is used as an expansion enclosure to a
PowerVault MD3200i series storage array, the physical disks of the expansion
enclosure are reinitialized and data is lost. You must backup all data on the
expansion enclosure before attempting the expansion.
To attach previously configured PowerVault MD1200 series expansion
enclosures to the PowerVault MD3200i series storage array:
1 Back up all data on the expansion enclosure(s).
2 While the enclosure is still attached to the PERC H800 controller,
upgrade the expansion enclosure firmware to the latest version available
at support.dell.com.
Windows systems users can reference the DUP.exe package and Linux
kernel users can reference the DUP.bin package.
3 Ensure that the storage array software is installed and up to date before
adding the expansion enclosure(s).
For more information, see the Support Matrix at
support.dell.com/manuals.
book.book Page 23 Sunday, September 11, 2011 10:24 PM