Expanding with new powervault md1200, Series expansion enclosures – Dell PowerVault MD3220i User Manual

Page 25

Advertising
background image

Hardware Installation

25

Expanding With New PowerVault MD1200 Series Expansion Enclosures

Perform the following steps to attach new PowerVault MD1200 series

expansion enclosures to a PowerVault MD3200i series storage array:

1 Before adding the expansion enclosure(s), ensure that the storage array

software is installed and up to date. For more information, see the Support

Matrix at support.dell.com/manuals.

a

Install the software and driver package included on the PowerVault

MD series resource media.
For information about installing the software, see "The PowerVault

MD series storage software installer provides features that include the

core software, providers, and optional utilities. The core software

feature includes the host-based storage agent, multipath driver, and

MD Storage Manager (MDSM) application used to configure,

manage, and monitor the storage array solution. The providers feature

includes providers for the Microsoft Virtual Disk Service (VDS) and

Microsoft Volume Shadow-Copy Service (VSS) framework. The

PowerVault Modular Disk Configuration Utility (MDCU) is an

optional utility that provides a consolidated approach for configuring

the management ports, iSCSI host ports, and creating sessions for the

iSCSI Modular Disk storage arrays. It is recommended that you install

and use PowerVault MDCU to configure iSCSI on each host

connected to the storage array." on page 27.

b

Set up the PowerVault MD1200 series expansion enclosure(s).
For information about setting up the PowerVault MD1200 series

expansion enclosure(s), see the Hardware Owner’s Manual at

support.dell.com/manuals.

c

Using PowerVault MDSM, update the RAID controller module

firmware and NVSRAM to the latest versions available on

support.dell.com. From the Enterprise Management Window

(EMW).

d

Click ToolsUpgrade RAID Controller Module Firmware.

2 Stop I/O and turn off all systems:

a

Stop all I/O to the storage array and turn off affected host systems

attached to the storage array.

b

Turn off the storage array.

book.book Page 25 Sunday, September 11, 2011 10:24 PM

Advertising
This manual is related to the following products: