Configuring mutual chap authentication on the, Storage array – Dell PowerVault MD3220i User Manual

Page 66

Advertising
background image

66

Appendix—Manual Configuration of iSCSI

Configuring Mutual CHAP Authentication on the Storage Array

The initiator secret must be unique for each host server that connects to the

storage array and must not be the same as the target CHAP secret.
Change the initiator authentication settings in the Change Target

Authentication window. Use these options to change the settings:

None—Select None if you permit no initiator authentication. If you select

None, any initiator can access this target. Use this option only if you do

not require secure data. However, you can select both

None and CHAP at

the same time.

CHAP—Select CHAP if you want to enable an initiator that tries to

access the target to authenticate using CHAP. Define the CHAP secret

only if you want to use mutual CHAP authentication. If you select

CHAP,

and if no CHAP target secret is defined, an error message is displayed.

Click

CHAP Secret to view the Enter CHAP Secret windows. Use this

window to define the CHAP secrets.

NOTE:

To remove a CHAP secret, you must delete the host initiator and re-add it.

Step 6: Configure CHAP Authentication on the

Host Server (Optional)

If you configured CHAP authentication in "Step 5: Configure CHAP

Authentication on the Storage Array (Optional)" on page 64, complete the

following steps. If not, skip to "Step 7: Connect to the Target Storage Array

From the Host Server" on page 70.
Select the set of steps in one of the following sections (Windows or Linux)

that corresponds to your operating system.
If you are using Windows Server 2008 GUI version:

1 Click StartProgramsMicrosoft iSCSI Initiator or click StartAll

ProgramsAdministrative ToolsiSCSI Initiator.

2 If you are not using mutual CHAP authentication, go to the step 4.
3 If you are using mutual CHAP authentication, click the General tab and

select

Secret. At Enter a secure secret, enter the mutual CHAP secret you

entered for the storage array

4 Click the Discovery tab.

book.book Page 66 Sunday, September 11, 2011 10:24 PM

Advertising
This manual is related to the following products: