Dell C3765dnf Color Laser Printer - Manual (Page 153)

Dell™ Printer Configuration Web Tool 151
Copy Color Balance Yellow Low Density Displays the color balance level of low density yellow.
Yellow Medium Density Displays the color balance level of medium density yellow.
Yellow High Density Displays the color balance level of high density yellow.
Magenta Low Density Displays the color balance level of low density magenta.
Magenta Medium Density Displays the color balance level of medium density magenta.
Magenta High Density
Displays the color balance level of high density magenta.
Cyan Low Density Displays the color balance level of low density cyan.
Cyan Medium Density Displays the color balance level of medium density cyan.
Cyan High Density Displays the color balance level of high density cyan.
Black Low Density Displays the color balance level of low density black.
Black Medium Density Displays the color balance level of medium density black.
Black High Density Displays the color balance level of high density black.
Copy Settings 2 Sided Copying Displays whether to print on both sides of a sheet of paper.
Binding of Original Displays the binding position for the 2-sided copying.
2-Up Displays whether the Multiple-Up feature is enabled.
Margin Top/Bottom Displays the value of the top and bottom margins.
Margin Left/Right Displays the value of the left and right margins.
Margin Middle Displays the value of the middle margin.
Fax Defaults Resolution Displays the resolution level to be used for fax transmission.
2 Sided Scanning Displays whether to scan both sides of a document.
Binding of Original Displays the binding position for the 2-sided scanning.
Darken/Lighten Displays the density level to be used for fax transmission.
Delayed Send Displays the fax transmission start time.
Fax Settings Fax Number Displays the fax number of the printer, which will be printed on the
header of faxes.
Country Displays the country where the printer is used.
Fax Header Name Displays the name of the sender that will be printed on the header of
faxes.
Line Type Displays the line type; PSTN or PBX.
Line Monitor Displays the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is made.
DRPD Pattern Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Receive Mode Displays the fax receiving mode.
Ring Tone Volume Displays the volume of the ring tone, which indicates that an incoming
call is a telephone call through the internal speaker when Receive
Mode is set to Telephone/Fax.
Auto Receive Fax Displays the interval at which the printer goes into the fax receive
mode after receiving an incoming call.
Auto Receive Tel/Fax Displays the interval at which the printer goes into the fax receive
mode after the external telephone receives an incoming call.
Auto Receive Answer/Fax Displays the interval at which the printer goes into the fax mode after
the external answering machine receives an incoming call.
Junk Fax Setup Displays whether to reject faxes sent from unwanted stations.
Sent Fax Forward Displays whether to forward incoming faxes to a specified destination.