Dell C3765dnf Color Laser Printer - Manual (Page 77)

Connecting Your Printer 75
Turning on the Printer
WARNING: Do not use extension cords or power strips.
WARNING: The printer should not be connected to an Uninterruptible Power Supply (UPS) system.
1 Connect the power cable to the power connector on the rear of the printer, and then to a power source.
2 Turn on the printer. When the printer is connected via a USB (Uninterruptible Power Supply) cable, the USB
driver is automatically installed.
Setting Initial Settings on the Operator Panel
You need to set the printer language, country, clock date, time, and fax settings when you turn on printer for the first
time.
When you turn the printer on, the wizard screen to perform the initial setup appears on the touch panel. Follow the
steps below to set the initial settings.
NOTE: If you do not start configuring the initial settings, the printer automatically restarts in three minutes, and the Main Home
screen appears on the touch panel. After that, you can set the following initial setup by enabling Power on Wizard on the
touch panel or Dell Printer Configuration Web Tool if needed.
For more information on operator panel, see "Operator Panel."
For more information on Dell Printer Configuration Web Tool, see "Dell™ Printer Configuration Web Tool."
1 The Select Your Language screen appears.
a Select until desired language appears, and then select the desired language.
English
Français
Italiano
Deutsch
Español
Dansk
Nederlands