Dell C3765dnf Color Laser Printer User Manual
Page 247
Understanding the Printer Menus
245
IPsec
NOTE:
IPsec feature is available only when IPsec is enabled on the Dell Printer Configuration Web Tool.
Purpose:
Disables IPsec.
Reset Wireless
NOTE:
Reset Wireless feature is available only when the printer is connected using the wireless network.
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network
settings are reset to their default values.
Connection Speed
NOTE:
Connection Speed feature is available only when the printer is connected using the wired network.
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the
printer is turned off and then on again.
Values:
Protocols
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
DHCP
Sets the IP address using DHCP.
Panel
Use this option when you want to set the IP address manually on the
operator panel.
IP Address
When an IP address is being set manually, the IP is allocated to the printer
using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the
range of 224 to 254 cannot be specified for the first octet of a gateway
address.
Subnet Mask
When an IP address is being set manually, the subnet mask is specified using
the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is
a value in the range of 0 to 255.255.255.255.255 cannot be specified as the
subnet mask.
Gateway Address
When an IP address is being set manually, the gateway address is specified
using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the
range of 224 to 254 cannot be specified for the first octet of a gateway
address.
Auto
*
Detects the Ethernet settings automatically.
10BASE-T Half
Uses 10BASE-T Half-duplex.
10BASE-T Full
Uses 10BASE-T Full-duplex.
100BASE-TX Half
Uses 100BASE-TX Half-duplex.
100BASE-TX Full
Uses 100BASE-TX Full-duplex.
1000BASE-T Full
Uses 1000BASE-T Full-duplex.