Dell C3765dnf Color Laser Printer - Manual (Page 416)

414 Printing Using ColorTrack (External Authentication)
When Using the Operator Panel
You can specify only the settings of ColorTrack Mode, Non Registered User, and ColorTrack Error Report using the
operator Panel.
1 Press the (Information) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select
until System Settings appears, and then select System Settings.
4 Select until ColorTrack Mode appears, and then select ColorTrack Mode.
5 Select External Mode, and then select OK.
6 Select
until Non Registered User appears, and then select Non Registered User.
7 Select Off or On, and then select OK.
8 Select
until ColorTrack Error Report appears, and then select ColorTrack Error Report.
9 Select Off or On, and then select OK.
10 Turn off the printer, and turn it on again to apply the settings.
ColorTrack Mode
The following two authentication modes are available: the Internal Mode using user information registered on the
printer, and the External Mode using user information registered on an external server. To authenticate on the
external authentication server with External Mode, you need not register user information on the printer. The
change becomes effective after the printer is turned off and then on again.
Non Registered User
Specify whether to permit the printing of data with no authentication information. This setting is enabled when the
printer is restarted. The change becomes effective after the printer is turned off and then on again.
Non Registered User Password
Specify the password to be used for non-account user using 1 to 127 alphanumeric characters. If the password is left
blank (NULL), you cannot log in to a server. The change becomes effective after the printer is turned off and then
on again.
NOTE: When External Mode is specified and Non Registered User is set to On, you must set a password.
NOTE: When using an LDAP server, you also must set the same password on the server.
Re-enter Non Registered User Password
Enter the Non Registered user password again to confirm it.
ColorTrack Error Report
Specify whether to automatically print error-related information if printing using ColorTrack results in an error.
Setup Remote Authentication
Click Setup Remote Authentication Page to display the Authentication System page.
NOTE: This item is displayed only when External Mode is specified.
Authentication System
Specify the server authentication type, the server response time-out, or the search time-out.