Dell C3765dnf Color Laser Printer - Manual (Page 160)

158 Dell™ Printer Configuration Web Tool
Values:
PCL Settings
Purpose:
To change the PCL settings.
Values:
PostScript Settings
Purpose:
To change printer settings that only affect jobs using the PostScript emulation printer language.
Values:
USB Port Enables the USB interface on your printer.
Adobe Protocol Sets PostScript communication protocol for each interface.
Paper Tray Sets the paper input tray.
Paper Size Sets the paper size.
Custom Paper Size - Y Sets the length of custom size paper. The available range is from 127 mm (5.0 inch) to 355 mm (14.0
inch).
Custom Paper Size - X Sets the width of custom size paper. The available range is from 77 mm (3.0 inch) to 215 mm (8.5
inch).
Orientation Sets how text and graphics are oriented on the page.
2 Sided Print Sets duplexing as the default for all print jobs.
Font Sets the font from the list of registered fonts.
Symbol Set Sets a symbol set for the specified font.
Font Size Sets the font size for scalable typographic fonts.
Font Pitch Sets the font pitch for scalable mono spaced fonts.
Form Line Sets the number of lines in a page.
Quantity Sets the number of copies to print.
Image Enhance Sets whether to enable the Image Enhancement feature.
Hex Dump Sets whether to help isolate the source of a print job problem. With Hex Dump selected, all data
sent to the printer is printed in hexadecimal and character representation. Control codes are not
executed.
Draft Mode Sets whether to print in the draft mode.
Line Termination Sets how to handle line terminations.
Default Color Sets the print color mode as Color or Black. This setting is used for print jobs without a specified
color print mode.
Ignore Form Feed Sets whether to ignore blank pages that only contain Form Feed control codes.
PS Error Report Sets whether the printer outputs error contents for a PostScript error.
PS Job Time-out Sets the execution time for one PostScript job.
Paper Select Mode Sets the way to select the tray for the PostScript mode.
Default Color Sets the default color mode for the PostScript mode.