Removing a vrm, Installing a vrm – Dell PRECISION 530 User Manual
Page 127
Advertising
Removing and Installing Parts
127
Re m o v i n g a V R M
4
Grasp the VRM by its top corners, and ease it out of its connector.
Installing a VRM
1
Press the securing clips at each end of the socket outward until they
snap open (see "
").
2
Align the slots on the bottom of the module with the ridges inside the
socket.
3
Press the module straight down into the socket until the securing clips
snap into place at the ends of the module.
4
.
5
6
Stand the computer upright.
7
Reconnect the computer and devices to their electrical outlets, and
turn them on.
VRM
VRM connector
securing clip
Advertising