Dell PRECISION 530 - Manual (Page 180)

180 Solving Problems
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
Runs a diagnostic test on your SCSI hard drive(s). The diagnostic
test does not cause data loss. However, you should back up any
important data before you run the test.
NOTE: The SCSI hard-drive diagnostics are intended for computers with
SCSI hard drives and will ignore IDE hard drives.
• Option 5 – Network Adapter Diagnostics/Configuration
Configures the resources and settings for the integrated network
adapter . It also allows you to run MS-DOS–based diagnostics on
the adapter to help solve problems.
For more information on this utility, refer to the 3Com
documentation provided with your computer.
• Option 6 – Adaptec RAID Configuration Utility
NOTE: The RAID configuration utility is not for use with your computer.
• Option 7 – Video Diagnostics
Displays a list of video controllers that can be installed in your
computer and then runs diagnostic tests on the video controller
you select.
NOTE: To find out what video adapter you have, click the Start button,
click Settings, click Control Panel, and double-click the Display icon. In
the Display Properties window, click the Settings tab. For Windows, the
video adapter is listed. For Windows NT, click Display Type to list the
video adapter.
After a diagnostic test runs, it tells you whether the test passed or
failed. You can isolate the part of the video subsystem that is
experiencing a problem by determining which tests pass or fail.
• Option 8 – Copy Hard Drive Controller Drivers to Diskette
Allows you to select and copy to diskette hard-drive controller
drivers appropriate for your computer. You can then manually
install the drivers that are not natively supported by the OS.
• Option 9 – Exit to DOS
Exits the main menu and returns to an MS-DOS prompt, at which
point you can remove the ResourceCD and restart your system.
7 Select Option 2 – Dell Diagnostics.
After the diagnostics load, the Dell Diagnostics main menu appears: