Sound and speaker problems, Step 6, Step 5 – Dell PRECISION 530 User Manual

Page 147

Advertising
background image

Solving Problems

147

5

Turn off the computer and monitor, wait 10 to 20 seconds, and

disconnect the monitor. Connect the monitor back to the original

computer, and then turn them on.

6

Turn off nearby fans, lights, lamps, or other electrical devices.

Is the monitor readable?
Yes. One or more of those devices was causing interference. The

problem is resolved.
No. Go to

step 7

.

7

Run the VESA/VGA Interface tests in the

Dell Diagnostics

.

Did any of the tests fail?
Yes. The video controller on the system board may be defective.

Contact Dell

for technical assistance.

No. Go to

step 8

.

8

Run video diagnostics from the

Dell Diagnostics

menu.

Did any of the tests fail?
Yes. The video controller on the system board may be defective.

Contact Dell

for technical assistance.

No.

Contact Dell

for technical assistance.

Sound and Speaker Problems

Basic Checks:

Check the

diagnostic lights

to see if the specific problem is identified.

If using external speakers:

– Ensure that external audio devices are properly connected to the

microphone, speaker/headphone, and line-in connectors on the

computer back panel

.

– Ensure that the speaker cable is firmly connected to the computer.

– Test the electrical outlet: verify that the speakers are connected to

a working electrical outlet.

– Ensure that the speakers are turned on.

Advertising