Dell Precision M2400 (Mid 2008) User Manual
Page 16
1.
Holding the card cage at a 45-degree angle, attach the front of the card cage to the base assembly, then lower the card cage into place.
2.
Replace the two M2 x 3 screws.
3.
Replace the palm rest assembly (
Replacing the Palm Rest Assembly
).
4.
Replace the right speaker grill (see
Replacing the Right Speaker Grill/Fingerprint Reader Assembly
).
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the LED cover (see
Replacing the LED Cover
).
7.
Replace the display assembly (see
Replacing the Display Assembly (E6400 and M2400)
or
Replacing the Display Assembly (E6400 ATG)
).
8.
Replace the heatsink assembly (see
Replacing the Processor Heatsink Assembly
).
9.
Replace the hinge covers (see
Replacing the Hinge Covers
).
10.
Replace the modular drive (see
Replacing the Modular Drive
).
11.
Replace the bottom of the base assembly (see
Replacing the Bottom of the Base Assembly
).
12.
Follow the procedures in
After Working on Your Computer
.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
1 M2 x 3 screws (2) 2 base assembly
3 front of card cage