Replacing the battery latch assembly – Dell Precision M2400 (Mid 2008) User Manual
Page 8
Replacing the Battery Latch Assembly
1.
Place the spring on the alignment bracket.
2.
Place the battery release button underneath the base assembly.
For the right battery latch assembly, slide the alignment bracket to the left to align the button with the hole in the alignment bracket.
For the left battery latch assembly, slide the alignment bracket to the right to align the button with the hole in the alignment bracket.
3.
Replace the M2 x 3-mm screw.
4.
Replacing the Battery Latch Assembly
5.
Replace the RJ-11 modem connector (see
Replacing the RJ-11 Modem Connector
).
6.
Replace the modem (see
Replacing the Modem
).
7.
Replace the system board (see
Replacing the System Board Assembly
).
8.
Replace the card cage (see
Replacing the Card Cage
).
9.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
10.
Replace the right speaker grill (see
Replacing the Right Speaker Grill/Fingerprint Reader Assembly
).
11.
Replace the keyboard (see
Replacing the Keyboard
).
12.
Replace the LED cover (see
Replacing the LED Cover
).
13.
Replace the display assembly (see
Replacing the Display Assembly (E6400 and M2400)
or
Replacing the Display Assembly (E6400 ATG)
).
14.
Replace the heatsink assembly (see
Replacing the Processor Heatsink Assembly
).
15.
Replace the hinge covers (see
Replacing the Hinge Covers
).
16.
Replace the modular drive (see
Replacing the Modular Drive
).
1 spring
2 alignment bracket
3 M2 x 3-mm screws (2) 4 battery release button
5 base assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTICE:
The battery release button is keyed to ensure proper alignment. If you feel resistance, check the alignment of the release button.