Dell Precision M2400 (Mid 2008) - Manual (Page 32)

Replacing the Display Bezel (E6400 ATG)
1. Align the latch hook on the display panel with the small rectangular opening on the display bezel.
2. Simultaneously push in on the right and left sides of the bezel to engage the side bezel snaps.
3. Simultaneously pull out on the top and bottom of the bezel to engage the top and bottom bezel snaps.
4. Gently snap the bezel into place to secure it to the display assembly.
5. Replace the display assembly (see Replacing the Display Assembly (E6400 ATG) ).
6. Replace the hinge covers (see Replacing the Hinge Covers ).
7. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly ).
8. Follow the procedures in After Working on Your Computer .
Removing the CCFL Display Panel and Brackets (E6400 and M2400)
1. Follow the instructions in Before Working on Your Computer .
1 right side of display bezel 2 top of display bezel
3 left side of display bezel 4 display panel
5 bottom of display bezel
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1 opening on display bezel 2 latch hook on display panel
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.