Processor module, Removing the processor module – Dell Precision M2400 (Mid 2008) User Manual

Page 19

Advertising
background image

Back to Contents Page

 

Processor Module

Dell™ Latitude™ E6400 and E6400 ATG and 

Mobile Workstation Precision™ M2400 Service Manual

  

Removing the Processor Module

  

Replacing the Processor Module

 

Removing the Processor Module

 

 

1.

Follow the instructions in

Before Working on Your Computer

.


 

2.

Remove the bottom of the computer (see

Removing the Bottom of the Base Assembly

).


 

3.

Remove the processor heatsink assembly (see

Removing the Processor Heatsink Assembly

).

 

 

4.

To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.

 

 

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1 processor module    

NOTICE:

To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.

1 ZIF socket 2 ZIF-socket cam screw

NOTICE:

To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor heatsink assembly. The oils in your

skin can reduce the heat transfer capability of the thermal pads.

Advertising