Dell PowerEdge RAID Controller 6E - Manual (Page 111)

Configuring and Managing RAID
111
Restoring Factory Default Settings
You can use the Ctrl Mgmt menu screen to restore the default settings for the
options in the Settings box. The settings are Enable Controller BIOS,
Enable Alarm, and Enable BIOS Stop on Error. Perform the following steps
to restore default settings:
1 Press <Ctrl><N> to access the Ctrl Mgmt menu screen.
2 Press <Tab> to move the cursor to the Settings box.
3 Use the spacebar to de-select the settings for the options in the Settings
box.
4 Press <Tab> to move the cursor to the Factory Default box, and press the
<Alt>, <Enter>, or the spacebar.
A dialog box displays for you to confirm your choice.
5 Select <OK> and press <Enter>.
The defaults are automatically selected for the controller settings and are
displayed in Settings.
Dell_PERC6.2_UG.book Page 111 Wednesday, June 24, 2009 6:08 PM