Dell PowerEdge RAID Controller 6E - Manual (Page 65)

Driver Installation
65
4 From the list of drivers displayed, select the driver you require. Select the
self-extracting zip file and click Run. Copy the driver to a diskette drive,
CD, DVD, or USB drive. Repeat this step for all the drivers you require.
5 During the operating system installation, use the media that you created
with the Load Driver option to load mass storage drivers. For more
information on reinstalling the operating system, see the relevant section
for your operating system below.
Downloading Drivers From the Dell Support Site
1 Go to support.dell.com.
2 Click Drivers and Downloads.
3 Enter the service tag of your system in the Choose by Service Tag field or
select your system’s model.
4 Select the System Type, Operating System, Driver Language, and
Category from the drop-down list.
5 The drivers that are applicable to your selection are displayed. From the
available list, download the drivers that you require to a diskette drive,
USB drive, CD, or DVD.
6 During the operating system installation, use the media that you created
with the Load Driver option to load mass storage drivers. For more
information on reinstalling the operating system, see the relevant section
for your operating system below.
Installing the Driver During a Windows Server 2003 or Windows XP
Operating System Installation
1 Boot the system using the Microsoft Windows XP/Microsoft Windows
Server 2003 media.
2 When the message Press F6 if you need to install a third party SCSI or
RAID driver displays in the bottom of the screen, press the <F6> key
immediately.
Within a few minutes, a screen displays asking for additional controllers in
the system.
Dell_PERC6.2_UG.book Page 65 Wednesday, June 24, 2009 6:08 PM