Dell PowerEdge RAID Controller 6E User Manual

Page 143

Advertising
background image

Glossary

143

G

GB

Acronym for gigabyte(s). A gigabyte equals 1,024 megabytes or 1,073,741,824
bytes (2^30 bytes).

H

Host System

Any system on which the RAID controller is installed. Mainframes,
workstations, and personal systems can all be considered host systems.

Hot Spare

An idle, powered on, stand-by physical disk ready for immediate use in case of
disk failure. It does not contain any user data. A hot spare can be dedicated to a
single redundant virtual disk or it can be part of the global hot-spare pool for all
virtual disks controlled by the controller.
When a disk fails, the controllers' firmware automatically replaces and rebuilds
the data from the failed physical disk to the hot spare. Data can be rebuilt only
from virtual disks with redundancy (RAID levels 1, 5, 10, or 50; not RAID 0),
and the hot spare must have sufficient capacity.
If the hot spare is designated as having enclosure affinity, it attempts to
rebuild any failed disks on the backplane within which it resides prior to
rebuilding any other on other backplanes.

Hot Swap

Replacement of a failed component while the system is running and operating
normally.

Dell_PERC6.2_UG.book Page 143 Wednesday, June 24, 2009 6:08 PM

Advertising