Dell POWEREDGE M1000E - Manual (Page 100)

72 Web Tools Administrator’s Guide
53-1001772-01
Admin Domain window
5
DRAFT: BROCADE CONFIDENTIAL
Perform the following steps to enable Admin Domains.
1. Change the Admin Domain context to AD0. Refer to “Changing the Admin Domain context” on
page 23.
NOTE
Changing the Admin Domain context requires using Web Tools with the EGM license;
otherwise, access to this feature is denied and an error message displays. Change the Default
Zone mode to No Access. Refer to
“Setting the default zoning mode” on page 121 for more
information.
2. Navigate to AD255 or the physical fabric and begin managing the Admin Domains.
Admin Domain window
You can view and manage Admin Domains through the Admin Domain window, shown in Figure 26 .
If you are not using Web Tools with the EGM licensed installed, managing Admin Domain
operations is denied and an error message displays.
The EGM license is required only for 8 Gbps platforms, such as the following:
• Brocade DCX and DCX-4S enterprise-class platforms
• Encryption Switch
• 300, 5300, and 5100 switches