Creating a discovery domain, Editing a discovery domain – Dell POWEREDGE M1000E User Manual
Page 222
194
Web Tools Administrator’s Guide
53-1001772-01
Discovery Domain management
15
DRAFT: BROCADE CONFIDENTIAL
Discovery domains can be created with virtual targets, iSCSI initiators, or both.
In the wizard, you can do the following tasks:
•
You can configure the DD. You must specify the DD name, and then you can add or remove
initiators and targets. You can also add any offline devices by entering the IQN name in the IQN
name field and clicking Add Offline Devices under the list on the right. The offline device name
is added to the Selected List.
•
You can also filter out initiators and targets from the tree in the Selection List by using the Filter
button. You can enter the full or partial name of an iSCSI member in the IQN Name text box and
click the Filter button. Based on the filter criteria, the tree displays only those members
satisfying the filter criteria. You then add the device by selecting the device and clicking the
Add button. In order to view the all available initiators and targets, click Show All.
Creating a discovery domain
Use the following procedure to create a discovery domain.
1. Open iSCSI Target Gateway Admin module as described in
2. Select the Discovery Domains tab.
3. Click Create DD.
The Create DD wizard displays.
4. Follow the instructions in the wizard to create an iSCSI discovery domain.
Editing a discovery domain
Use the following procedure to edit a discovery domain.
1. Open iSCSI Target Gateway Admin module as described in
2. Select the Discovery Domains tab.
3. Select a DD in the left pane and click Edit.
4. Select virtual targets and use the buttons to add or remove them from the DD.
5. Click Next.
The opening screen with a list of virtual targets that you added to your DDs displays.
6. Click Next.
You can verify the virtual targets that you added to your DDs.
7. Click Finish.
You can confirm the changes that you made before committing them.