Dell POWEREDGE M1000E - Manual (Page 185)

Web Tools Administrator’s Guide 157
53-1001772-01
Configuring the backbone fabric ID
11
DRAFT: BROCADE CONFIDENTIAL
5. Select the General tab.
6. Click Set Fabric ID in the task bar.
The Configure Backbone Fabric ID window displays.
7. Select a fabric ID from the drop-down menu.
NOTE
The fabric ID is a number from 1 through 128. Web Tools warns you if you select a fabric ID that
is already in use.
8. Click OK.
9. After Web Tools automatically re-enables the FC-FC Routing Service, select all the EX_Ports in
the table, and click Enable..