Dell POWEREDGE M1000E - Manual (Page 112)

84 Web Tools Administrator’s Guide
53-1001772-01
Port management overview
6
DRAFT: BROCADE CONFIDENTIAL
• Indirect members are:
- Non-owned ports on a member switch
- Non-owned ports to which member devices are attached
• All active ports, as well as any inactive EX_Ports are shown.
Port Administration window components
The Port Administration window has the following two tabs in the top left corner:
• FC Ports tab displays all of the FC ports on the switch (physical FC ports and logical FCIP ports)
• GigE Ports tab displays all of the GbE ports
If the switch does not have GbE ports, the GigE Ports tab does not display.
The GigE Ports tab has the following three subtabs:
- Interfaces—Lets you view interfaces
- Routes—Lets you view routes
- FCIP tunnel—Lets you view tunnels. This tab has two buttons: Go to FCIP port and Show
Security Policies.
On selecting an FCIP tunnel the following circuit details with the circuit properties are
displayed:
 Circuit Number
 Tunnel ID
 Administrator Status
 Operational Status
 GigEPort
 Source IP
 Gateway
 VLAN ID
 MTU Size
 Compression Enabled
 Data L2COS Value
 DSCP Data
 IKE Policy Number
 IPsec Policy Enabled
 Keep Alive Timeout
 MaximumCommunicationRate
 MinimumCommunicationRate
 MaxRetransmitRate
 MinRetransmitRate
 Metric
 Pre-Shared key
 QOS Mapping
 Selective Ack